Tips for Operating Welding Mahine During the Rainy Season

Welding machines use high voltage and current, which can be dangerous if exposed to water. Therefore, it is important to be careful when operating a welding machine during rainy season. As for diesel engine driven welders, operating during the rainy season requires extra care to ensure safety and maintain performance. Here are some tips to keep in mind:

1. Protect the Machine from Water:
– Use a Shelter: Set up a temporary cover such as a tarpaulin, canopy or any weather resistant cover to keep the machine dry. Or place it in a specialized room to keep the machine out of the rain.
– Elevate the Machine: If possible, place the machine on a raised platform to prevent it from sitting in water.
2. Check Electrical Connections:
– Inspect Wiring: Water can cause short circuits or electrical malfunctions, make sure all electrical connections are dry and undamaged.
– Use Insulated Tools: Use insulated tools when handling electrical components to prevent electric shock and ensure personal safety.

3. Maintain Engine Components:
– Dry Air Filter: Wet air filters can reduce engine performance, so make sure the screen is clean and dry.
– Monitor Fuel System: Water in diesel fuel can cause poor engine performance or damage, so keep a close eye on the fuel system for signs of water contamination.
4. Regular Maintenance:
– Inspect and Service: Regularly inspect and maintain your diesel engine, focusing on components that may be affected by moisture, such as the fuel system and electrical components.

- Change Fluids: Replace engine oil and other fluids as necessary, especially those contaminated with water
5. Safety Precautions:
– Use Ground Fault Circuit Interrupters (GFCI): Make sure the welding machine is connected to a GFCI outlet to prevent electric shock.
– Wear Proper Gear: Use insulated gloves and rubber-soled boots to minimize the risk of electric shock.
6. Avoid Working in Heavy Rain:
– Monitor Weather Conditions: Avoid operating the welding machine in heavy rain or severe weather conditions to minimize risk.
– Schedule Work Appropriately: Plan the welding schedule to avoid severe weather conditions as much as possible.
7. Ventilation:
– When setting up a sheltered area, ensure that the area is adequately ventilated to prevent the buildup of harmful fumes.
8. Inspect and Test Equipment:
– Pre-Start Check: Before starting the machine, carry out a full inspection of the welding machine to ensure a good working condition.
– Test Run: Briefly run the machine to check if there are any problems before starting the welding operation.

By taking these precautions, you can further help ensure that your diesel engine driven welder operates safely and efficiently during the rainy season.

AGG Welding Machines and Comprehensive Support

Designed with a soundproof enclosure, AGG diesel engine driven welder has good sound insulation, water resistance and dust resistance, effectively preventing damage to the equipment caused by bad weather.

In addition to high quality products, AGG always insists on ensuring the integrity of each project from design to after-sales service. AGG technical team can provide customers with the necessary assistance and training to ensure the normal operation of the welding machine and the customers’ peace of mind.

Know more about AGG here: https://www.aggpower.com

Email AGG for welding support:info@aggpowersolutions.com